Description
Protective, water-based coating can be used to cover and block pre-existing mold, mildew and odor-causing bacteria. Use it directly on nearly any dry, debris-free, non-porous, interior or exterior surface with minimal pre-cleaning. Proven, registered and approved antimicrobial-fungicidal agent prevents the growth of all fungal organisms.
- Paint directly over mold, mildew and stains.
- Kills existing mold, mildew and odor-causing bacteria.
- Protective, water-based formula for interior and exterior use.
- Binds to chalky siding, masonry, metal, plaster and more.
- Ideal for residential, commercial and industrial environments.
- For extensive stains, pair with a Zinsser® stain-blocking primer.
| Paint Sub-Category | Primer; Water-Based |
| Intended Application Environment | Interior/Exterior |
| Finish/Sheen | Flat |
| Color(s) | White |
| Color Family | White |
| Number of Colors | 1 |
| Volume Capacity | 1 gal |
| Packaging Type | Bucket/Pail |
| Binder/Vehicle Ingredient(s) | Styrene Acrylic |
| Diluent/Solvent Ingredient(s) | Ethylene Glycol; Water |
| Pigment/Dye/Filler Ingredient(s) | Calcium Carbonate |
| Application Method | Brush; Roller |
| Recommended Level of Ventilation | Moderate |
| Application Temperature Range | 50° to 80° F |
| Applicable Surface Material | Cement/Concrete; Drywall; Glass/Ceramics; Masonry; Metal; Plaster; Plastic; Wood |
| Maximum Coverage Area | 400 to 450 sq ft |
| Cure/Dry-Time Range | 30 min (Touch); 1 h (Handle/Recoat); 7 days (Full Cure) |
| Age Recommendation | Ages 16 and Up |
| Product Biodegradability | No |
| Product Biodegradability in Days | 0 |
| Product Compostability | No |
| Compliance Standards | EPA Reg. No. 87469-1-69587 |
| Pre-Consumer Recycled Content Percent | 0% |
| Post-Consumer Recycled Content Percent | 0% |
| Total Recycled Content Percent | 0% |
| Disclaimer Statement | Do not apply when air or surface temperatures are below 50° F (10° C) or when drying conditions are poor. Not recommended for new or unpainted metal and vinyl siding or for floors, decks and other surfaces subjected to full-immersion and/or prolonged contact with water. For optimal protection, apply topcoat product within 72 hours. |
| Footnote 1 | Recommended Dry Film Thickness (DFT) Per Coat: 1 to 2 mil |
| Footnote 2 | Recommended Wet Film Thickness to Achieve DFT: 2.5 to 5 mil |
