Description
Versatile, abrasion-resistant coating is designed for high traffic areas that are subject to routine cleaning and disinfection. Excellent adhesion qualities allow it to be applied on a wide range of materials, indoor and out. Low-odor, water-based formula.
- Versatile, abrasion-resistant coating for walls, doors, trim, floors and more.
- Ideal for high traffic areas that are subject to routine cleaning and disinfection.
- Excellent adhesion qualities—compatible with a wide range of materials.
- Use it for interior and exterior sufaces.
- Low odor, water-based formula.
| Paint Sub-Category | Epoxy; Water-Based |
| Intended Application Environment | Interior/Exterior |
| Finish/Sheen | Gloss |
| Color(s) | Silver Gray |
| Color Family | Gray |
| Number of Colors | 1 |
| Volume Capacity | 1 gal |
| Packaging Type | Bucket/Pail |
| Binder/Vehicle Ingredient(s) | Modified Urethane Latex Epoxy |
| Diluent/Solvent Ingredient(s) | Glycol Ether; Water |
| Application Method | Brush; Roller |
| Application Temperature Range | 50° to 90° F |
| Applicable Surface Material | Cement/Concrete; Drywall; Masonry; Metal; Plaster; Wood |
| Maximum Coverage Area | 155 to 330 sq ft |
| Cure/Dry-Time Range | 15 min (Touch); 45 min (Handle); 2 h (Recoat); 24 h (Light Foot Traffic); 3 days (Vehicle Traffic); 7 days (Full Cure) |
| Age Recommendation | Ages 16 and Up |
| Product Biodegradability | No |
| Product Biodegradability in Days | 0 |
| Product Compostability | No |
| Compliance Standards | USDA FSIS Regulatory Sanitation Performance Compliant; VOC Compliant |
| Pre-Consumer Recycled Content Percent | 0% |
| Post-Consumer Recycled Content Percent | 0% |
| Total Recycled Content Percent | 0% |
| Disclaimer Statement | For best results, apply within the recommended Application Temperature Range (50° to 90° F) when the surface temperature is also at least 5° F (3° C) above the dew point and the relative humidity is not greater than 85%. |
| Footnote 1 | Recommended Dry Film Thickness (DFT) Per Coat: 1.5 to 2.5 mil |
| Footnote 2 | Recommended Wet Film Thickness to Achieve DFT: 4 to 7 mil |
